Profile: P2055
Thickness: 3mm
Colours: Clear, grey, diffuser opal
Panel Length: Up to 5m, for longer panel lengths please contact the Technical Department
Options: Available in Marlon BioPlus
Light Transmission
| Colour | Light | Solar |
| Clear (S) | 84% | 90% |
| Diffuser Opal (US) | 65% | 51% |
| Grey (GA) | 53% | 70% |
When lapping panels always ensure that the Underlap (short leg) is to the bottom. The Underlap is clearly identified on the panel packaging.
As a condition of ensuring that Marlon R Glaze panels perform at optimum throughout their service life and retain light transmission properties, it is recommended that the panels be cleaned periodically using suitable household cleaning agents as follows:
- Use lukewarm water to rinse the panel and soften dirt.
- Make up a solution of lukewarm water and ordinary household cleaner or a mild soap and use this to wash the panel.
- A sponge or soft cloth should then be used to gently remove dirt and grime.
- The cleaning process should then be repeated and the panel rinsed and dried with a soft cloth.
WARNING
Care should be taken to observe the following precautions:
- Do not scrub Marlon R Glaze panels with brushes or sharp instruments as they will mark easily.
- Never steam clean, use low pressures for pressure washing.
- Avoid any abrasives or cleaners of a highly alkaline composition.
- It is generally advisable in all instances to test any cleaner on a sample piece of the Marlon R Glaze panel first and it should also be remembered that cleaners and solvents which state that they are suitable for cleaning polycarbonate may not be safe for use on the UV protective surface of the panels.
- Marlon R Glaze is a high quality, extruded, easy fit polycarbonate roof glazing panel with a co-extruded UV resistant coating
- As polycarbonate is a thermoplastic, it is important to take thermal expansion and contraction into account during any installation process.
- For the most current Fire Certification please contact our Technical Department.
- Marlon R Glaze panels are REACH and RoSH compliant, and 100% recyclable
- Any colour option is a through-colour so the colour of a cut edge will match the colour of the surface.
- Marlon R Glaze panels are covered by a limited warranty. For full details contact our Technical Department
